Trade Only · Ex VAT

Rigid-Grade Cabinet Carcasses, Priced for the Trade

Ready-to-assemble kitchen carcasses held in stock at our Blackburn warehouse. 18mm solid carcase, 1mm PVC edging all round, soft-close hinges as standard and every fitting in the box. A spec your customers will notice, at a price that protects your margin.

18mmsolid carcase & back
1mm PVCedging all round
In Stockstandard sizes, fast supply
0mmsolid carcase & back, not hardboard
1mm PVCedging on all four edges
In StockBlackburn warehouse, quick supply
Soft-Closehinges standard, not an upsell
The Units

The Back Panel Tells You Everything

A carcass is easy to cheapen where nobody looks. Ours is 18mm on the back as well as the sides, cam and dowel throughout so it squares up and stays square, and soft-close on every door as standard. They are shown here assembled, which is the only honest way to photograph a flat pack.

A 600mm base unit assembled, on adjustable legs with a shelf fitted
600 base unitAssembled and levelled on its adjustable legs, with the shelf in and the hinges fitted.
The same base unit from behind, showing the 18mm solid back panel screwed through
Base unit, from behind18mm solid back, screwed through. This is the part that keeps a run square.
A 600mm wall unit assembled with two adjustable shelves and soft-close hinges
600 wall unitTwo adjustable shelves and soft-close hinges, ready to hang.
The same wall unit from behind with heavy-duty adjustable hangers fitted to both sides
Wall unit, from behindHeavy-duty adjustable hangers, both sides. They come with every wall unit, and we fit them if you order it built.
Cabinet Anatomy

Every Unit, Built the Same Way

The same construction runs through the whole range. Here's exactly what's inside a Prestige carcass, panel by panel.

Technical cutaway of a Prestige base unit: 18mm solid back, 40mm service void, adjustable shelf, cam and dowel construction, 1mm PVC edging, 150mm adjustable legs, 560mm deep
Technical cutaway of a Prestige wall unit: 18mm MFC carcase, housed back panel, two adjustable shelves, cam and dowel construction, 1mm PVC edging, heavy-duty concealed wall hangers, 300mm deep
Full Specification

The Numbers That Matter

No guesswork. These are the dimensions and materials on every unit we stock, ready for you to spec against.

Carcase board18mm melamine-faced chipboard (MFC)
Back panel18mm solid, fully housed, not hardboard
Edging1mm PVC on all four edges, impact-resistant
ConstructionCam & dowel, squares up rigid and true
Base unit depth560mm, with 40mm service void for pipes & cables
Wall unit depth300mm (720mm & 900mm high options)
Larder unit depth560mm (1970mm & 2150mm high options)
Legs150mm fully adjustable, four per base unit
HingesSoft-close supplied as standard, standard drilling
DrawersDTC runners, 2 / 3 / 4 drawer packs available
FinishWhite carcase, held in stock (further colours coming)
SizesStandard sizes held in stock, ready to dispatch
In the boxScrews, cams, dowels, pins, shelves, legs, wall hangers
Trade Prices

One Price, Openly

We don't run tiered trade accounts, and there's no percentage held back to be negotiated later. Every customer sees the same number, and it is already as keen as we can make it. Rather than ask you to ring for it, here is a page of the book.

Flat packed, in white £37.82 300 highline base BH300
Flat packed, in white £46.38 600 highline base BH600
Flat packed, in white £52.26 1000 highline base BH1000
Kitchen Base · Base Hi-Line 16 units · 150 to 1200mm · page 12 of the price list
Trade prices for our Base Hi-Line units, in board group G1 and flat packed
CodeUnitW×H×DG1Flat packed
BH150150 Highline Base150×720×560£43.58£34.86
BH260260 Highline Base260×720×560£46.32£37.06
BH300300 Highline Base300×720×560£47.27£37.82
BH350350 Highline Base350×720×560£48.12£38.50
BH400400 Highline Base400×720×560£49.53£39.62
BH450450 Highline Base450×720×560£50.72£40.58
BH500500 Highline Base500×720×560£51.17£40.94
BH550550 Highline Base550×720×560£54.68£43.74
BH600600 Highline Base600×720×560£57.98£46.38
BH700700 Highline Base700×720×560£62.75£50.20
BH800800 Highline Base800×720×560£63.31£50.65
BH900900 Highline Base900×720×560£64.07£51.26
BH10001000 Highline Base1000×720×560£65.32£52.26
BH11001100 Highline Base1100×720×560£67.81£54.25
BH12001200 Highline Base1200×720×560£72.93not flat packed
BO600600 Oven housing unit600×720×560£50.17£40.14
Get the full price list, free

Thirty-four pages: every code, all five board groups, the drawer packs, wall, larder and panels. Emailed over, usually within a working day, and you don’t need an account to see it.

Trade prices, ex VAT, carcass only. G1 is our most widely used board group and covers 59 colours; G2 to G5 are in the full list. Flat-packed units are supplied in white, and we’ll assemble them here for £5 a unit if you would rather not build them. Where a unit shows no flat-packed price it is assembled only, as is our bedroom range. Prices are taken from our list dated August 2026 and can change; the emailed copy is always the current one.

In Every Box

Nothing to Order Separately

The full fittings pack with every carcass, counted for the unit it belongs to. No shortfall to chase on a Friday afternoon, and no trip to the merchant for a bag of cams.

The fittings pack: cam locks, dowels, screws, shelf pegs and cover caps, bagged
The fittings pack. Cams, dowels, pegs, screws and cover caps, counted for the unit it belongs to.
Four integrated soft-close hinges with their mounting plates
Integrated soft-close hinges. Standard on every door unit, mounting plates included, never an upsell.
A pair of adjustable wall hangers with their wall plates
Adjustable wall hangers. Supplied with every wall unit, plates included. Height and depth both adjust on site.
Four adjustable cabinet legs with clip-on plinth brackets
Adjustable legs. Four to a base unit, plinth clips included. They level to whatever the floor is doing.
Soft-close hinges, fitted or supplied, on every door unit
Cam locks & dowels, the full connector set for a rigid build
Shelf pegs and adjustable shelves where the unit calls for them
Adjustable legs for base units, levelled to any floor
Wall hangers, heavy-duty brackets on every wall unit
Assembly-ready panels, pre-drilled, edged and squared
Why Buy From Us

A Supplier Who Picks Up the Phone

Every carcass we sell is cut, edged and drilled in our own factory in Blackburn rather than bought in and badged up. Three things follow from that.

Our edgebander applying 1mm PVC edging to a cabinet panel
Our own edgebander in Blackburn. Every panel we sell goes through it, which is why the edging is 1mm PVC on all four edges rather than tape on the two you can see.
01

Keen Trade Pricing

Held in stock and priced for the trade, so a premium spec still leaves you a healthy margin on every job. Ask for the list and see where the numbers land.

02

Consistent, In Stock

Standard sizes on the shelf and the same spec every order. What you quote your customer this month is exactly what turns up next month, with nothing to explain away.

03

Local & Responsive

Stocked and dispatched from our Blackburn warehouse, so an extra unit or a missing part is a quick call rather than a long wait on a container.

Board Groups

What G1 to G5 Actually Means

The code and the size fix the unit. What moves the price is the board you pick, and whether you want it built or flat packed.

202 board colours, arranged into five groups. The group reflects the finish and texture of the board rather than the colour alone, which is why the same colour can appear in more than one group. A unit priced in G3 costs the same whichever G3 board you pick, and board and door colour are chosen separately — you are not tied to matching one to the other.

G1 59 colours

Plain matt and standard textured boards. Our most widely used group, covering the whites, greys, beiges and solid colours.

G2 81 colours

Deep textured woodgrains, linens, stone effects and brushed metallics.

G3 25 colours

Synchronised pore oaks, where the texture follows the grain of the print.

G4 14 colours

True matt boards, soft to the touch and resistant to fingerprints.

G5 23 colours

High gloss and supermatt lacquered boards, our most specialised finish.

Working With Us

What Happens Once You Order

The answers you would otherwise have to ring up for. All of it is in the price list too, in more detail.

Ordering

How to order
Email info@prestigecabinets.co.uk or WhatsApp 01254 937073. Both give us the written record we need to get it right, and that is the office line as well if you would rather talk it through first.
What to include
Unit code, quantity, and the board group or board name for each line. State the carcass board and edging colour clearly, plus the delivery address and the date you need it.
Lead times
Around three working days for flat packed, seven for bespoke. Busy periods stretch that, and we tell you when you order rather than after.
Bespoke units
Give width, height, depth and the hinge side on the order. Anything not spelled out is made to the standard sizes.
Amendments
Free until your order enters production. After that it depends how far along it is, so tell us early.

Delivery

Within 30 miles
Free, from our own warehouse on Blakewater Road. That covers most of Lancashire and Greater Manchester.
Further out
Charged by the mile and quoted when you order, so you have the figure before you commit. Longer distances may go by courier, passed on at cost.
Booking a slot
Tell us the date and we confirm it. Morning or afternoon can be requested, allocated in the order booked.
On site
Someone from your company needs to be there to help unload, check the load against the delivery note and sign for it.
Shortages and damage
Count the load before you sign and report shortages the same day. Damage within three working days, so you can unwrap and check properly rather than counting boxes on a wet driveway.

Payment is due in full on delivery unless account terms are agreed in writing beforehand, quotations hold for 30 days, and standard stock items can be returned within 14 days unused and in their original packaging. Bespoke units cannot be returned. The full conditions of sale are in the price list.

Get the Trade Price List

Pricing, spec sheet and current lead times, sent straight over. No account needed to see the numbers.

Or call the trade desk direct on 01254 937073, or message us on WhatsApp.

Trade prices, no account needed No minimum order Price list emailed, usually within a working day 18mm solid carcase, soft-close as standard

Request the Trade Price List

Tell us a little about your business and we'll email you pricing plus current lead times, usually within a working day.

Trade enquiries only. No account or minimum order to get pricing.

Thanks, That's In

We'll email the price list and current lead times over to you, usually within a working day. Need it faster? Call the trade desk on 01254 937073 or WhatsApp us.